SCULP-METAL CO -- SCULP-METAL MODELING METAL  -- 8010-00F006750
<pre>=====================  Product Identification  =====================

Product ID:SCULP-METAL MODELING METAL
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006750
=== Responsible Party ===
Company Name:SCULP-METAL CO/PITTSBURGH, PA 15222
Emergency Phone Num:(412) 681-6669
CAGE:23256
=== Contractor Identification ===
Company Name:SCULP-METAL CO/PITTSBURGH, PA 15222
CAGE:23256

=============  Composition/Information on Ingredients  =============

Ingred Name:ADDITIVES
Fraction by Wt: 15%

Ingred Name:_
Fraction by Wt: _
ACGIH TLV:_

Ingred Name:PIGMENTS
Fraction by Wt: 40%

Ingred Name:VEHICLE
Fraction by Wt: 20%

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 25%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:SHORTENING OF BREATH, SIGNS OF APPARENT
    INTOXICATION IN PROLONGED USE IN CONFINED AREAS.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR & CALL PHYSICIAN. IF
    BREATHING IS STOPPED, GIVE ARTIFICIAL RESPIRATION. DO NOT INDUCE
    VOMITING. IF SKIN BECOMES IRRITATED, FLUSH THOROUGHLY WITH COLD
    WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:48F TOC
Extinguishing Media:WATER OR ANY APPROVED EXTINGUISHING AGENT
Fire Fighting Procedures:VENTILATE AREA THOROUGHLY TO OPEN AIR.
Unusual Fire/Explosion Hazard:DON'T USE NEAR FIRE OR OPEN FLAME OR
    CLOSELY CONFINED NON-VENTILATED AREAS. DON'T STORE >120F.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE TO OPEN AIR IN PASTE FORM. AFTER
    HARDENING - ANY NORMAL DISPOSAL METHOD.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, OPEN FLAME. USE
    AT TEMPERATURES 40F TO 100F. DO NOT VENTILATE VAPORS THROH CENTRAL
    AIR CONDITIONING SYSTEMS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AVOID PROLONGED BREATHING OF VAPOR.
Ventilation:LOCAL EXHAUST/MECHANICAL: OPEN AIR
Eye Protection:WEAR GOGGLES
Supplemental Safety and Health
MSDS UNDATED. LIQUID ALUMINUM PASTE

==================  Physical/Chemical Properties  ==================

Vapor Density:.90
Appearance and Odor:PUTTY-LIKE MIXTURES; ACETONE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OIL/VINYL BASED PAINTS & MATERIALS/LACQUER/PLEXIGLASS/RUBBER
Stability Condition to Avoid:DO NOT STORE >120F.
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:BEFORE HARDENING - SEAL IN CONTAINER AND PLACE
    IN NON-BURNABLE REFUSE. AFTER HARDENING - ANY NORMAL DISPOSAL
    METHOD.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.