HEWLETT-PACKARD CO -- HP LASER JET TONER CARTRIDGE C3906A, C3906A  -- 6850-01-428-3583
<pre>=====================  Product Identification  =====================

Product ID:HP LASER JET TONER CARTRIDGE C3906A, C3906A
MSDS Date:01/31/1995
FSC:6850
NIIN:01-428-3583
=== Responsible Party ===
Company Name:HEWLETT-PACKARD CO
Address:11311 CHINDEN BLVD
City:BOISE
State:ID
ZIP:83714
Country:US
Info Phone Num:208-396-6000
Emergency Phone Num:208-396-6000
CAGE:18660
=== Contractor Identification ===
Company Name:HEWLETT-PACKARD CO  BOISE DIV
Address:11311 CHINDEN BLVD
Box:City:BOISE
State:ID
ZIP:83714
Country:US
Phone:208-396-6000
CAGE:18660

=============  Composition/Information on Ingredients  =============

Ingred Name:STYRENE ACRYLATE COPOLYMER
CAS:25153-46-2
Fraction by Wt: 45-55%

Ingred Name:IRON OXIDE
CAS:1317-61-9
Fraction by Wt: 45-55%
OSHA PEL:10 MG/M3
ACGIH TLV:5 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50:(ORAL,RAT) >5000 MG/KG
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:MINIMAL RESPIRATORY
    TRACT IRRITATION MAY OCCUR AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY
    NON-TOXIC DUST. EYE:MAY CAUSE IRRITATION. CHRONIC:NONE LISTED BY
    MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST:DILUTE STOMACH CONTENTS WITH SEVERAL GLASSES OF WATER.
    INHAL:REMOVE VICTIM TO FRESH AIR. EYE:FLUSH WITH RUNNING WATER FOR
    AT LEAST 15 MINUTES. SKIN:WASH WITH SOAP AND WATER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CO*2, WATER, DRY CHEMICALS.
Fire Fighting Procedures:NONE. USE NIOSH APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TONER MATERIAL, LIKE MOST ORGANIC
    MATERIAL IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NO TONER SPILLAGE OCCURS IN NORMAL OPERATIONS
    OR HANDLING. IF IT SHOULD OCCUR, AVOID INHALATION OF THE DUST.
    SWEEP MATERIAL ONTO PAPER AND CAREFULLY TRANSFER TO A SEALABLE
    WASTE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
    AWAY FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED UNDER INTENDED USE. NIOSH APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT UNDER
    INTENDED USE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
    SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Spec Gravity:1.4-1.8(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK FINE POWDER, SLIGHT PLASTIC ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMBUSTION WILL PRODUCE CARBON DIOXIDE
    AND, POSSIBLE TOXIC CHEMICALS SUCH AS CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:THIS PRODUCT IS CONSTRUCTED FROM PLASTICS AND
    METALS. THE WASTE TONER COULD BE CONSIDERED AS PLASTIC WASTE.
    DISPOSAL SHOULD BE SUBJECT TO FEDERAL, STATE OR LOCAL LAWS.

 ======================================================================
 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.